Lenticular Maker: Let your print come alive!
Join the challenge to win up to $720
Join Now
Time: Aug 17–Sep 7, 2026
Prism Height: 0.8
Prism Height: 1.6
Lenticular On Anything
Your printed image gains real 3D relief you can see and feel — the design appears to lift off the flat surface as you shift your viewing angle, no lens-sheet needed.
Start CreatingIn Web Generator
In eufyMake Studio
1
Choose your substrate
Any flat, rigid surface works. We recommend eufyMake's official fridge magnet blank.
2
Upload Images
Upload 2 images — ideally the same scene with significant motion difference between them.
3
Adjust Parameters
Fine-tune the generation settings and confirm the preview result.
4
Upload & Print
Upload the Depth Map to Craft Mode → Customize Texture. Adjust print parameters.
Upload your design and start printing.
Upload your design and start printing.
Download your design and depth map
Print on Lenticular Sheets
Tilt the card and watch it flip between up to 8 frames — perfect for seamless, before/after reveals, or a short looping DIY turned into a physical card.
* Blur or ghosting on your first try is normal — that's why we recommend starting at 50 LPI.
In Web Generator
In eufyMake Studio
1
Choose your substrate
lenticular lens sheet.
Start with 50 LPI — easiest to align.
Start with 50 LPI — easiest to align.
2
Upload Images
Upload 2–8 images, or a GIF/video split into frames. Use high-resolution photos or videos for best results.
3
Configure
Set lenticular parameters.
4
Upload & Print
Upload your design and print the alignment jig.
Place the sheet smooth-side up, align with the jig.
Align stripe direction with the printer's X-axis for best results.
Place the sheet smooth-side up, align with the jig.
Align stripe direction with the printer's X-axis for best results.
Download your design and alignment jig.